Soil and Vegetation Spectral Coupling Difference (SVSCD) for Minerals Extraction from Hyperion Data in Vegetation Covered Area     

Shengbo Chen  Shuang Huang  Yanli Liu  Chao Zhou 《中国地理科学(英文版)》2018,28(6):957-972

Remote sensing data have been widely applied to extract minerals in geologic exploration, however, in areas covered by vegetation, extracted mineral information has mostly been small targets bearing little information. In this paper, we present a new method for mineral extraction aimed at solving the difficulty of mineral identification in vegetation covered areas. The method selected six sets of spectral difference coupling between soil and plant (SVSCD). These sets have the same vegetation spectra reflectance and a maximum different reflectance of soil and mineral spectra from Hyperion image based on spectral reflectance characteristics of measured spectra. The central wavelengths of the six, selected band pairs were 2314 and 701 nm, 1699 and 721 nm, 1336 and 742 nm, 2203 and 681 nm, 2183 and 671 nm, and 2072 and 548 nm. Each data set’s reflectance was used to calculate the difference value. After band difference calculation, vegetation information was suppressed and mineral abnormal information was enhanced compared to the scatter plot of original band. Six spectral difference couplings, after vegetation inhibition, were arranged in a new data set that requires two components that have the largest eigenvalue difference from principal component analysis (PCA). The spatial geometric structure features of PC1 and PC2 was used to identify altered minerals by spectral feature fitting (SFF). The collecting rocks from the 10 points that were selected in the concentration of mineral extraction were analyzed under a high-resolution microscope to identify metal minerals and nonmetallic minerals. Results indicated that the extracted minerals were well matched with the verified samples, especially with the sample 2, 4, 5 and 8. It demonstrated that the method can effectively detect altered minerals in vegetation covered area in Hyperion image.  相似文献   

Responses of soil moisture to vegetation restoration type and slope length on the loess hillslope     

Xue-mei Mei  Lan Ma  Qing-ke Zhu  Shu Wang  Dong Zhang  Yu Wang 《山地科学学报》2018,15(3):548-562

Soil moisture, a critical variable in the hydrologic cycle, is highly influenced by vegetation restoration type. However, the relationship between spatial variation of soil moisture, vegetation restoration type and slope length is controversial. Therefore, soil moisture across soil layers (0-400 cm depth) was measured before and after the rainy season in severe drought (2015) and normal hydrological year (2016) in three vegetation restoration areas (artificial forestland, natural forestland and grassland), on the hillslopes of the Caijiachuan Catchment in the Loess area, China. The results showed that artificial forestland had the lowest soil moisture and most severe water deficit in 100-200 cm soil layers. Water depletion was higher in artificial and natural forestlands than in natural grassland. Moreover, soil moisture in the shallow soil layers (0-100 cm) under the three vegetation restoration types did not significantly vary with slope length, but a significant increase with slope length was observed in deep soil layers (below 100 cm). In 2015, a severe drought hydrological year, higher water depletion was observed at lower slope positions under three vegetation restoration types due to higher transpiration and evapotranspiration and unlikely recharge from upslope runoff. However, in 2016, a normal hydrological year, there was lower water depletion, even infiltration recharge at lower slope positions, indicating receiving a large amount of water from upslope. Vegetation restoration type, precipitation, slope length and soil depth during a rainy season, in descending order of influence, had significant effects on soil moisture. Generally, natural grassland is more beneficial for vegetation restoration than natural and artificial forestlands, and the results can provide useful information for understanding hydrological processes and improving vegetation restoration practices on the Loess Plateau  相似文献   

On the electron density diagnostics of silicon <Emphasis Type="SmallCaps">viii</Emphasis> ion in solar transition region     

Jian He  Qingguo Zhang 《Astrophysics and Space Science》2018,363(9):194

The conditions for accurate electron density diagnostics in the solar transition region are discussed, and result shows that lines from Si?viii can provide an excellent tool for electron density diagnostics of the emitting plasma. For the Si?viii 1440.50 Å and 1445.75 Å lines, the principle of the electron density diagnostics is discussed for any intensity ratio. By the observed intensity ratio, the diagnostic results of the electron density for the quiet sun and the active region are calculated, and results indicate that in the quiet sun, the averaged electron density is \(\log (N_{e}) = 8.63\); while in the active region, the averaged density gets the maximum \(\log (N_{e}) = 8.86\) in the active region (B), and gets the minimum \(\log (N_{e}) = 8.38\) in the active region (E), where the electron density is in the unit of cm^?3. Finally, the relationship of intensity ratio and electron density is discussed, in the case of lower and higher electron density limits. This discussion is significant in the electron density diagnostics, which will be important for study on coronal heating and acceleration of solar wind.  相似文献   

Long Term Evolution of Solar Meridional Circulation and Phase Synchronization Viewed Through a Symmetrical Kuramoto Model     

Elena Blanter  Jean-Louis Le Mouël  Mikhail Shnirman  Vincent Courtillot 《Solar physics》2018,293(10):134

The solar-cycle oscillations of the toroidal and poloidal components of the solar magnetic field in the northern solar hemisphere have a persistent phase difference of about \(\pi \). We propose a symmetrical Kuramoto model with three coupled oscillators as a simple way to understand this anti-synchronization. We solve an inverse problem and reconstruct natural frequencies of the top and bottom oscillators under the conditions of a constant coupling strength and a non-delayed coupling. These natural frequencies are associated with angular velocities of the meridional flow circulation near the solar surface and in the deep layer of the solar convection zone. A relationship between our reconstructions of the shallow and the deep meridional flow speed during recent Solar Cycles 21?–?23 is in agreement with estimates obtained in helioseismology and flux-transport dynamo modeling. The reconstructed top oscillator speed presents significant solar-cycle like variations that agree with recent helioseismical reconstructions. The evolution of reconstructed natural frequencies strongly depends on the coupling strength. We find two stable regimes in the case of strong coupling with a change of regime during anomalous solar cycles. We see the onset of a new transition in Solar Cycle 24. We estimate the admitted range of coupling values and find evidence of cross-equatorial coupling between solar hemispheres not accounted for by the model.  相似文献   

Editorial     

Ram Sagar 《Journal of Astrophysics and Astronomy》2018,39(6):71

  相似文献   

Element sets for high-order Poincaré mapping of perturbed Keplerian motion     

David J. Gondelach  Roberto Armellin 《Celestial Mechanics and Dynamical Astronomy》2018,130(10):65

The propagation and Poincaré mapping of perturbed Keplerian motion is a key topic in Celestial Mechanics and Astrodynamics, e.g., to study the stability of orbits or design bounded relative trajectories. The high-order transfer map (HOTM) method enables efficient mapping of perturbed Keplerian orbits using the high-order Taylor expansion of a Poincaré or stroboscopic map. The HOTM is only accurate close to the expansion point and therefore the number of revolutions for which the map is accurate tends to be limited. The proper selection of coordinates is of key importance for improving the performance of the HOTM method. In this paper, we investigate the use of different element sets for expressing the high-order map in order to find the coordinates that perform best in terms of accuracy. A new set of elements is introduced that enables extremely accurate mapping of the state, even for high eccentricities and higher-order zonal perturbations. Finally, the high-order map is shown to be very useful for the determination and study of fixed points and center manifolds of Poincaré maps.  相似文献   

Explicit stress–strain equations for modeling frictional materials     

Kenneth J. Xu  Martin D. Liu  Buddhima Indraratna 《Marine Georesources & Geotechnology》2018,36(6):722-734

In this paper, a comprehensive study on simulating the shearing behavior of frictional materials is performed. A set of two explicit equations, describing the relationship among the shear stress ratio and the distortional strain and the volumetric strain, are formulated independently. The equations contain three stress parameters and three strain parameters and another parameter representing the nonuniformity of stress and strain during softening. All the parameters have clear physical significance and can be determined experimentally. It is demonstrated that the proposed equations have the capacity of simulating the complicated shearing behavior of many types of frictional materials including geomaterials. The proposed equations are used to simulate the stress–strain behavior for 27 frictional materials with 98 tests. These materials include soft and stiff clays in both reconstituted and structured states, silicon sands and calcareous sands, silts, compacted fill materials, volcanic soils, decomposed granite soils, cemented soils (both artificially and naturally cemented), partially saturated soils, ballast, rocks, reinforced soils, tire chips, sugar, wheat, and rapeseed. It has been demonstrated that the proposed explicit constitutive equations have the capacity to capture accurately the shearing behavior of frictional materials both qualitatively and quantitatively. A study on model parameters has been performed.  相似文献   

Studies on the Application of Steady State Assumption in 1DV Model for the Estimation of Settling Velocity of Suspended Sediments in a Shallow Estuary     

K. L. Priya 《Ocean Science Journal》2018,53(3):449-459

Settling velocity is one of the important parameters in sediment transport modeling of estuaries. The methods adopted for its determination vary from theoretical equations to experimental methods. The theoretical equation generally adopted in the 1DV model include assumptions in order to simplify the solution. It is generally assumed that either the condition is steady or the vertical diffusion is negligible. This study evaluated the relative importance of the two assumptions made for the estimation of settling velocity. Two approaches were adopted: unsteady and negligible vertical diffusion (NS-NVD) and steady with vertical diffusion (S-VD) to estimate the settling velocity. The Muthupet Estuary in the Coromandal coast of India was selected for the study. The S-VD approach estimated settling velocity fairly well at the two locations with appreciable vertical diffusion. The NS-NVD approach was observed to be superior for estimating settling velocity at shallow reaches of the estuary having low flow velocity. The calculated settling velocity was further applied in 1DV model to predict the suspended sediment concentration. The S-VD approach predicted suspended sediment concentration at those locations with appreciable vertical diffusion with an R² value of 0.82 against 0.67 for the NS-NVD approach. At the other shallow reach of the estuary with low flow velocity, the NS-NVD approach gave an R² value of 0.822 against 0.71 for the S-VD approach. The vertical diffusion was observed to play a secondary role at those locations which are shallow with a water depth of 0.6 m and with a low flow velocity of the order of 0.01 m/s. The study demonstrated that localized hydrodynamic conditions influence the method adopted for the estimation of settling velocity.  相似文献   

Design of Buoys for Mounting Wind Turbines at Exposed Sites     

ERDO?AN Beytullah  ?EL?KKOL Barbaros  SWIFT Robinson 《中国海洋大学学报(英文版)》2018,17(2):257-266

In this study, two designs for a buoy capable of supporting a 10 kW wind turbine and its tower were developed to operate at the University of New Hampshire’s Center of Ocean Renewable Energy testing site located off the Isles of Shoals, New Hampshire. The buoys are to be moored by a catenary chain system. To evaluate wave response, two Froude-scaled models were constructed, tested, and compared at the Ocean Engineering wave tank at the University of New Hampshire. These buoys have been implemented and compared with wave tank measurements of the spar displacement at a reference elevation 2.44 m above the mean water level.  相似文献   

A terrain openness index for the extraction of karst Fenglin and Fengcong landform units from DEMs   总被引：1，自引：0，他引：1  

Xin Meng  Li-yang Xiong  Xian-wu Yang  Bi-sheng Yang  Guo-an Tang 《山地科学学报》2018,15(4):752-764

The Fenglin and Fengcong landform units are considered to be an important representation for defining the degree of development of Karst landforms. However, these terrain features have been proven difficult to delineate and extract automatically because of their complex morphology. In this paper, a new method for identifying the Fenglin and Fengcong landform units is proposed. This method consists of two steps: (1) terrain openness calculation and (2) toe line extraction. The proposed method is applied and validated in the Karst case area of Guilin by using ASTER GDEM with one arc-second resolution. The openness of both the positive and negative terrain and a threshold were used to extract toe lines for segmenting depressions and pinnacles in Fenglin and Fengcong landforms. A comparison between the extracted Fenglin and Fengcong landform units and their real units from high resolution images was carried out to evaluate the capability of the proposed method. Results show the proposed method can effectively extract the Fenglin and Fengcong landform units, and has an overall accuracy of 93.28%. The proposed method is simple and easy to implement and is expected to play an important role in the automatic extraction of similar landform units in the Karst area.  相似文献